AB Glue dispensing machine
Epoxy encapsulants can be cured at room temperature, or they can be cured by heating. Epoxy encapsulants have a wide range of applications. So, what do you know about the nine characteristics of epoxy encapsulants? The following are the characteristics of epoxy potting sealant introduced by AB potting machine manufacturers: 1. Environment-friendly and non-polluting: It can be melted at a lower temperature and has uniform fluidity; 2. Dielectric strength is high and insulation performance is high. Well, reduce the operating temperature of the original device to extend the service life of the product; 3, have good thermal conductivity, heat dissipation, high temperature, low temperature, excellent thermal stability, so the sensitivity to high temperature is greatly reduced; 4, to prevent aging: the After the product is potted and solidified, it is not easy to age, avoiding the phenomenon of easy aging and cracking of other similar products; 5, good sealing performance: its excellent sealing performance reduces the vibration and noise of electronic products; 6, moisture and moisture proof: coating or Encapsulated electronic components have excellent moisture-proof, waterproof, dust-proof, anti-corrosion, ozone-resistant, weather-resistant and other aspects of good effect; 7, lower potting temperature, will not damage the heat degree at 85 °C - Components above 105°C; 8, Curing at room temperature: Can be cured at room temperature in a short time after potting, and the cooling rate is fast; 9. The potting process is simple: potting can be done by hand or potting machine, assembly line operation, Easy to operate and increase production efficiencyCurrently, many products on the market are using dispensers for dispensing. In addition to the laying of railways, the demand for high-speed trains for polyurethane adhesives is also increasing. Polyurethanes are used for glass bonding, floor bonding, and caulking on vehicles. Filling, sealing, waterproof and other essential functions, in the vehicle, in accordance with the CRH3 of the MU train, a single car with polyurethane glue about 84.07L converted to about 109.3Kg, mainly used for adhesive bonding of window glass And part of the filling of the seal.