Language
get a quote

Product List

Dust-Free & Safety-Enhanced PGB-501 Dispensing System with Protective Enclosure for Communication Modules | Daheng Custom Solutions

Dust-Free & Safety-Enhanced PGB-501 Dispensing System with Protective Enclosure for Communication Modules | Daheng Custom Solutions

Category:Automatic AB glue dispensing machine
Brand:D&H
Model:PGB-501
Applications:electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil,reverse sensor, circuit board, filter products ,underwater parts
Suitable Material:One-component glue or already mixed glue ,Solder Paste, Epoxy, Silicone, PU, Black Glue, White Glue, etc

Inquiry

Video

Features

System Introduction：
1. Working Mode: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
3. Core metering pump specially design for different material from low to high viscosities.
4. Mix glue A & B more evenly; no more or no less for agent B.
 
 
ITEM
Parameter
Mixing ratio
100:100--100:8 adjustable
Working range
600*600*100mm
Displacement speed
0-200mm/s adjustable（speed）
Out-glue speed
1-24g/s base on ratio
Accuracy
±2%（output volume）±2%（mixing）
tolerance
≤0.2mm
Flow control
Digital input
Program memory
999pcs
Motion trail
Dot , line ,curve ,circle
Automatic controlling system
Touch screen (to achieve program programming, modification, storage and so on
Out-glue control system
AB glue back suction valve, achieve AB glue independent operation
Programmatically
Tech programming or
With computer systems (Micro software Windows 7,Windows10 optional)
Mixing method
dynamic mixing
Power supply
3800V/50-60Hz 1.5KW exclude heating
Air source
0.3-0.7Mpa
Viscosity range
10-20000cps
Outer dimension
1500L*1200W*1600H mm
A tank
40L stainless tank（optional）
B tank
40L stainless tank（optional）
Others
AB tank 、A pump、AB pipeline heating function
Working principle ：
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data

Dust-Free & Safety-Enhanced PGB-501 Dispensing System with Protective Enclosure for Communication Modules | Daheng Custom Solutions

1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature.
3 Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level .
4 Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure .
5 Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve.
6 Tank with heater which can preheat materials to assure good flowability .
7 Tank with artificial feeding mouth that can be added glue appropriately by hand .
8 Tank with silica-dryer which can prevent material especially PU from crystallization .

Self-Cleaning：

Turn the cleaning ball valve to the liquid position;
1. B) The cleaningswitch points to "air" and uses compressed air to discharge most of the mixturein the mixing tube;
2. C) The cleaningswitch points to "liquid". If there is a dynamic mixing motor, turn on the dynamic mixing motor before changing the clean switch;
3. D) After cleaning, the cleaning switch points to "air" and usescompressed air to clear the cleaning liquid in the mixed tube;
4. E) The cleaning switch points to the middle positiononce finished.