Language
  • Phone: [+86-18926136913]
  • Email:sales@dahengkongjiao.com

Product List

Visual Glue Potting Machine PGV-3000

Brand:D&H
Model:PGV-3000
Applications:LED、Arts and crafts、Electrical and electronic, other electronic products where glue potting demanded
Suitable Material:Two-component liquid (AB),silicon, epoxy , Polyurethane

Visual Glue Potting Machine‘s features:1、CCD Positioning  2、Lighting source optional  3、Intelligent match

Video

Features

1、CCD Positioning

2、Lighting source optional

3、Intelligent match

XYZ working area:3000*500*100mm

Moment Track:Dot/Line/Arc/Circle

Speed:800mm/s(Movement speed)1-12ml/s(gluing out speed)

Accuracy:±0.03mm(Repeatability) ±2%(potting) ±2%(mixing)

Program:+∞

Input pressure:0.5MPa-0.7MPa

Viscosity:50cps-30000cps(Glue can be heated to decrease viscosity)

Operation Method:Manual/Automatic

Meter Pump:Gear pump/Screw pump/Double cylinder plunger pump

Flow Control: Digital Input

Programming method: teaching programming

Automated control system: PLC / touch screen (programming, modification, storage, etc.)

Glue control system: AB glue suction valve to achieve independent operation of AB glue

Mixed mode: dynamic static optional, instant mixing, easy to clean

Tank:stainless steel(25L)、(10L)optional

Power supply: 220V/50Hz/1200W ( Power consumption without heater)

Dimension:4000*1200*1700mm

Optional function: Automatic needle calibration

Liquid A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.

Advantage of automatic glue dispensing machine:

1. Fully automatic operation, accurate proportion and even mixing

2. Glue dosing while mixing, no waste of glue and no waste of consumables. Precise dosing and dispensing.

3. The glue amount of the product is consistent and good. The edge of the machine is clean without glue.

4. Machine glue dosing save much time and effective and lower cost

5. There is no need for glue pouring staff, only one operator is needed to complete the mass production


Normally technical issues should be solved to choose the glue potting machine

1. Ratio between the base agent and hardener: 1:1 or 10:1

2. Fillers:Abrasive the base agent includes percentage of additives and fillings such as aluminum oxide, or silica powder, in order to increase the hardness or heat conduction 

3. The mixed liquid is abrasive, cause big friction to the pump.

4. Need to vacuum to remove the air bubble inside

5. Not easy to mix the two components evenly.

6. Vacuum: to remove the air bubble inside the adhesive;

7. Self-cleaning;

8. Heating: pre-heat the resin before used

9. Dynamic Mixing Method to mix evenly;

10. Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;Multi-nozzle: to improve capacity.

11. High Precision Valve;

12. Quality & Strict position control system.

13. Multi-head nozzle available.