High Viscosity Glue Dispensing Machine GND-700’s features：High viscosity structural adhesive machine,Perfectly solve high viscosity glue ratio mixing,Suitable for automotive related product,Suitable for new energy industries
AB ratio: 100:100-100:10 adjustable
Movement Track: Dot/Line/Arc/Circle
Accuracy:±0.01mm (Repeatability)±2% (potting)±2% (mixing)
Input pressure: 0.5MPa-0.7MPa
Automated control system: PLC / touch screen (programming, modification, storage, etc.)
Mixed mode: dynamic static optional, instant mixing, easy to clean
Power supply: 220V/50Hz/1200W ( Power consumption without heater )
3 axis working area: 700*700*100MM
Speed: 300mm/s (Movement speed) 1-12ml/s (gluing-out speed)
Meter Pump: Gear pump/Screw pump/Double cylinder plunger pump
Programming method: teaching programming
Glue control system: AB glue valve/pinch valve
Storage tank: 5 gallons/55 gallons
Dimension: 110*1100*1700MM (pressure plate pump excluded)
Liquid A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
1. Fully automatic operation, accurate proportion and even mixing
2. Glue dosing while mixing, no waste of glue and no waste of consumables. Precise dosing and dispensing.
3. The glue amount of the product is consistent and good. The edge of the machine is clean without glue.
4. Machine glue dosing save much time and effective and lower cost
5. There is no need for glue pouring staff, only one operator is needed to complete the mass production
1. Ratio between the base agent and hardener: 1:1 or 10:1
2. Fillers：Abrasive the base agent includes percentage of additives and fillings such as aluminum oxide, or silica powder, in order to increase the hardness or heat conduction
3. The mixed liquid is abrasive, cause big friction to the pump.
4. Need to vacuum to remove the air bubble inside
5. Not easy to mix the two components evenly.
6. Vacuum: to remove the air bubble inside the adhesive;
8. Heating: pre-heat the resin before used
9. Dynamic Mixing Method to mix evenly;
10. Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;Multi-nozzle: to improve capacity.
11. High Precision Valve;
12. Quality & Strict position control system.
13. Multi-head nozzle available.