Language
  • Phone: [+86-18926136913]
  • Email:sales@dahengkongjiao.com

Product List

Manual operation glue dispenser SD-200

Brand:D&H
Model:SD-200
Applications:The electronics, LED, crafts and where glue dispense demanded products.
Suitable Material:One-component glue or already mixed glue ,Solder Paste, Epoxy, Silicone, PU, Black Glue, White Glue, etc

Video

Features

Glue Dispenser Machine

1. High precise glue controller assure glue dispensing accurately .

2. Simple operation and convenient adjustment .

3. Universal use

4. It can be customized many functions to meet up with clients’ special requirements .

 

 

 

Moving Speed: 0-300mm/s adjustable

Repeatability: ±1%

Mixing Accuracy: ±1%

Ratio:Pneumatic Supply

Tank Capacity: 55ml, 200ml,300ml 2.6Lor customized

Gluing Speed: 5-66g/5s adjustable

Air Pressure: 0.5-0.7Mpa

Power Input: AC220V 50-60Hz or customized

Dimension: 200*100*200mm

Weight: 5 KG roughly

 

 

1. Put the adhesive into the syringe, cover it with the lid, install it onto the fixture

2. Edit the program according to the demanded running path and save the program when it finished.

3. Adjust the controller according to demanded glue amount in the unit product, and save the data when setting is finished.

4. Make trial production to check if everything goes well;

 

 

Advantage of automatic glue dispensing machine:

1. Fully automatic operation, accurate proportion and even mixing

2. Glue dosing while mixing, no waste of glue and no waste of consumables. Precise dosing and dispensing.

3. The glue amount of the product is consistent and good. The edge of the machine is clean without glue.

4. Machine glue dosing save much time and effective and lower cost

5. There is no need for glue pouring staff, only one operator is needed to complete the mass production


Normally technical issues should be solved to choose the glue potting machine

1. Ratio between the base agent and hardener: 1:1 or 10:1

2. Fillers:Abrasive the base agent includes percentage of additives and fillings such as aluminum oxide, or silica powder, in order to increase the hardness or heat conduction 

3. The mixed liquid is abrasive, cause big friction to the pump.

4. Need to vacuum to remove the air bubble inside

5. Not easy to mix the two components evenly.

6. Vacuum: to remove the air bubble inside the adhesive;

7. Self-cleaning;

8. Heating: pre-heat the resin before used

9. Dynamic Mixing Method to mix evenly;

10. Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;Multi-nozzle: to improve capacity.

11. High Precision Valve;

12. Quality & Strict position control system.

13. Multi-head nozzle available.