1. Glue controlling system of metering, mixing and potting.
2. Accurate metering and even mixing helps to avoid the waste of glue.
3. Dispensing size and positioning keep machine work consistent and fast.
4. Good universality
5. Easy to program and operate.
6. Tally function, non-standard mode, primer mode, level alert, filter mode, liquid display device, preventing back-flow device and other functional device.
|Mixing Ratio||100:100-10:100(1:1-1:10) Adjustable|
|Mixing mode||Dynamic mixing /Static mixing|
|Glue Viscosity||Lower than 35000 CPS (mPa·s)|
|Control mode||PLC + Touch Screen|
|Control system||Independent R&D|
|Measuring mode||Stepping motor/High-precision, wear-resistant,
long-life Gear pump
|Working voltage||AC 220V 50Hz/60Hz|
|Weight||600 KG Roughly|
|Work environment||Humidity: 20%~98%RH; Temperature: 0~+40°c|
1. Fully automatic operation, accurate proportion and even mixing
2. Glue dosing while mixing, no waste of glue and no waste of consumables. Precise dosing and dispensing.
3. The glue amount of the product is consistent and good. The edge of the machine is clean without glue.
4. Machine glue dosing save much time and effective and lower cost
5. There is no need for glue pouring staff, only one operator is needed to complete the mass production
1. Ratio between the base agent and hardener: 1:1 or 10:1
2. Fillers：Abrasive the base agent includes percentage of additives and fillings such as aluminum oxide, or silica powder, in order to increase the hardness or heat conduction
3. The mixed liquid is abrasive, cause big friction to the pump.
4. Need to vacuum to remove the air bubble inside
5. Not easy to mix the two components evenly.
6. Vacuum: to remove the air bubble inside the adhesive;
8. Heating: pre-heat the resin before used
9. Dynamic Mixing Method to mix evenly;
10. Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;Multi-nozzle: to improve capacity.
11. High Precision Valve;
12. Quality & Strict position control system.
13. Multi-head nozzle available.